- 在线时间
- 140 小时
- 经验
- 53411
- 性别
- 保密
- 最后登录
- 2012-10-10
- 精华
- 6
- 日志
- 0
- 相册
- 0
- UID
- 2
  
- 帖子
- 19877
- 积分
- 53531
- 注册时间
- 2007-3-25
|
Linux Kernel核心中文手册
来自：蓝森林自由软件
Appendix A （附录 A ）
inux Data Structures （ Linux 数据结构）
本附录列出了本书中描述的 Linux 使用的主要的数据结构。为了在页面上访得下，它们经过了少量的编辑。
Block_dev_struct
block_dev_struct 数据结构用于登记可用的块设备，让 buffer cache 使用。它们放在 blk_dev 向量表中。
参见 include/linux/blkdev.h
struct blk_dev_struct {
void (*request_fn)(void);
struct request * current_request;
struct request plug;
struct tq_struct plug_tq;
} ;
buffer_head
buffer_head 数据结构存放 buffer cache 中一个块缓冲区的信息。
参见 include/linux/fs.h
* bh state bits */
#define BH_Uptodate 0 /* 1 if the buffer contains valid data */
#define BH_Dirty 1 /* 1 if the buffer is dirty */
#define BH_Lock 2 /* 1 if the buffer is locked */
#define BH_Req 3 /* 0 if the buffer has been invalidated */
#define BH_Touched 4 /* 1 if the buffer has been touched (aging) */
#define BH_Has_aged 5 /* 1 if the buffer has been aged (aging) */
#define BH_Protected 6 /* 1 if the buffer is protected */
#define BH_FreeOnIO 7 /* 1 to discard the buffer_head after IO */
struct buffer_head {
/* First cache line: */
unsigned long b_blocknr; /* block number */
kdev_t b_dev; /* device (B_FREE = free) */
kdev_t b_rdev; /* Real device */
unsigned long b_rsector; /* Real buffer location on disk */
struct buffer_head *b_next; /* Hash queue list */
struct buffer_head *b_this_page; /* circular list of buffers in one
page */
/* Second cache line: */
unsigned long b_state; /* buffer state bitmap (above) */
struct buffer_head *b_next_free;
unsigned int b_count; /* users using this block */
unsigned long b_size; /* block size */
/* Non-performance-critical data follows. */
char *b_data; /* pointer to data block */
unsigned int b_list; /* List that this buffer appears */
unsigned long b_flushtime; /* Time when this (dirty) buffer
* should be written */
unsigned long b_lru_time; /* Time when this buffer was
* last used. */
struct wait_queue *b_wait;
struct buffer_head *b_prev; /* doubly linked hash list */
struct buffer_head *b_prev_free; /* doubly linked list of buffers */
struct buffer_head *b_reqnext; /* request queue */
} ;
device
系统中的每一个网络设备都用一个 device 数据结构表示
参见 include/linux/netdevice.h
struct device
{
/*
* This is the first field of the "visible" part of this structure
* (i.e. as seen by users in the "Space.c" file). It is the name
* the interface.
*/
char *name;
/* I/O specific fields */
unsigned long rmem_end; /* shmem "recv" end */
unsigned long rmem_start; /* shmem "recv" start */
unsigned long mem_end; /* shared mem end */
unsigned long mem_start; /* shared mem start */
unsigned long base_addr; /* device I/O address */
unsigned char irq; /* device IRQ number */
/* Low-level status flags. */
volatile unsigned char start, /* start an operation */
interrupt; /* interrupt arrived */
unsigned long tbusy; /* transmitter busy */
struct device *next;
/* The device initialization function. Called only once. */
int (*init)(struct device *dev);
/* Some hardware also needs these fields, but they are not part of
the usual set specified in Space.c. */
unsigned char if_port; /* Selectable AUI,TP, */
unsigned char dma; /* DMA channel */
struct enet_statistics* (*get_stats)(struct device *dev);
/*
* This marks the end of the "visible" part of the structure. All
* fields hereafter are internal to the system, and may change at
* will (read: may be cleaned up at will).
*/
/* These may be needed for future network-power-down code. */
unsigned long trans_start; /* Time (jiffies) of
last transmit */
unsigned long last_rx; /* Time of last Rx */
unsigned short flags; /* interface flags (BSD)*/
unsigned short family; /* address family ID */
unsigned short metric; /* routing metric */
unsigned short mtu; /* MTU value */
unsigned short type; /* hardware type */
unsigned short hard_header_len; /* hardware hdr len */
void *priv; /* private data */
/* Interface address info. */
unsigned char broadcast[MAX_ADDR_LEN];
unsigned char pad;
unsigned char dev_addr[MAX_ADDR_LEN];
unsigned char addr_len; /* hardware addr len */
unsigned long pa_addr; /* protocol address */
unsigned long pa_brdaddr; /* protocol broadcast addr*/
unsigned long pa_dstaddr; /* protocol P-P other addr*/
unsigned long pa_mask; /* protocol netmask */
unsigned short pa_alen; /* protocol address len */
struct dev_mc_list *mc_list; /* M'cast mac addrs */
int mc_count; /* No installed mcasts */
struct ip_mc_list *ip_mc_list; /* IP m'cast filter chain */
__u32 tx_queue_len; /* Max frames per queue */
/* For load balancing driver pair support */
unsigned long pkt_queue; /* Packets queued */
struct device *slave; /* Slave device */
struct net_alias_info *alias_info; /* main dev alias info */
struct net_alias *my_alias; /* alias devs */
/* Pointer to the interface buffers. */
struct sk_buff_head buffs[DEV_NUMBUFFS];
/* Pointers to interface service routines. */
int (*open)(struct device *dev);
int (*stop)(struct device *dev);
int (*hard_start_xmit) (struct sk_buff *skb,
struct device *dev);
int (*hard_header) (struct sk_buff *skb,
struct device *dev,
unsigned short type,
void *daddr,
void *saddr,
unsigned len);
int (*rebuild_header)(void *eth,
struct device *dev,
unsigned long raddr,
struct sk_buff *skb);
void (*set_multicast_list)(struct device *dev);
int (*set_mac_address)(struct device *dev,
void *addr);
int (*do_ioctl)(struct device *dev,
struct ifreq *ifr,
int cmd);
int (*set_config)(struct device *dev,
struct ifmap *map);
void (*header_cache_bind)(struct hh_cache **hhp,
struct device *dev,
unsigned short htype,
__u32 daddr);
void (*header_cache_update)(struct hh_cache *hh,
struct device *dev,
unsigned char * haddr);
int (*change_mtu)(struct device *dev,
int new_mtu);
struct iw_statistics* (*get_wireless_stats)(struct device *dev);
} ;
device_struct
device_struct 数据结构用于登记字符和块设备（存放这个设备的名称和可能进行的文件操作）。 Chrdevs 和 blkdevs 向量表中的每一个有效的成员都分别代表一个字符或块设备。
参见 fs/devices.c
struct device_struct {
const char * name;
struct file_operations * fops;
} ;
file
每一个打开的文件、 socket 等等都用一个 file 数据结构代表
参见 include/linux/fs.h
struct file {
mode_t f_mode;
loff_t f_pos;
unsigned short f_flags;
unsigned short f_count;
unsigned long f_reada, f_ramax, f_raend, f_ralen, f_rawin;
struct file *f_next, *f_prev;
int f_owner; /* pid or -pgrp where SIGIO should be sent */
struct inode * f_inode;
struct file_operations * f_op;
unsigned long f_version;
void *private_data; /* needed for tty driver, and maybe others */
} ;
file_struct
file_struct 数据结构描述了一个进程打开的文件
参见 include/linux/sched.h
struct files_struct {
int count;
fd_set close_on_exec;
fd_set open_fds;
struct file * fd[NR_OPEN];
} ;
fs_struct
参见 include/linux/sched.h
struct fs_struct {
int count;
unsigned short umask;
struct inode * root, * pwd;
} ;
gendisk
gendisk 数据结构存放硬盘的信息。用在初始化过程中找到磁盘，探测分区的时候
参见 include/linux/genhd.h
struct hd_struct {
long start_sect;
long nr_sects;
} ;
struct gendisk {
int major; /* major number of driver */
const char *major_name; /* name of major driver */
int minor_shift; /* number of times minor is shifted to
get real minor */
int max_p; /* maximum partitions per device */
int max_nr; /* maximum number of real devices */
void (*init)(struct gendisk *);
/* Initialization called before we
do our thing */
struct hd_struct *part; /* partition table */
int *sizes; /* device size in blocks, copied to
blk_size[] */
int nr_real; /* number of real devices */
void *real_devices; /* internal use */
struct gendisk *next;
} ;
inode
VFS inode 数据结构存放磁盘上的一个文件或目录的信息
参见 include/linux/fs.h
struct inode {
kdev_t i_dev;
unsigned long i_ino;
umode_t i_mode;
nlink_t i_nlink;
uid_t i_uid;
gid_t i_gid;
kdev_t i_rdev;
off_t i_size;
time_t i_atime;
time_t i_mtime;
time_t i_ctime;
unsigned long i_blksize;
unsigned long i_blocks;
unsigned long i_version;
unsigned long i_nrpages;
struct semaphore i_sem;
struct inode_operations *i_op;
struct super_block *i_sb;
struct wait_queue *i_wait;
struct file_lock *i_flock;
struct vm_area_struct *i_mmap;
struct page *i_pages;
struct dquot *i_dquot[MAXQUOTAS];
struct inode *i_next, *i_prev;
struct inode *i_hash_next, *i_hash_prev;
struct inode *i_bound_to, *i_bound_by;
struct inode *i_mount;
unsigned short i_count;
unsigned short i_flags;
unsigned char i_lock;
unsigned char i_dirt;
unsigned char i_pipe;
unsigned char i_sock;
unsigned char i_seek;
unsigned char i_update;
unsigned short i_writecount;
union {
struct pipe_inode_info pipe_i;
struct minix_inode_info minix_i;
struct ext_inode_info ext_i;
struct ext2_inode_info ext2_i;
struct hpfs_inode_info hpfs_i;
struct msdos_inode_info msdos_i;
struct umsdos_inode_info umsdos_i;
struct iso_inode_info isofs_i;
struct nfs_inode_info nfs_i;
struct xiafs_inode_info xiafs_i;
struct sysv_inode_info sysv_i;
struct affs_inode_info affs_i;
struct ufs_inode_info ufs_i;
struct socket socket_i;
void *generic_ip;
} u;
} ;
ipc_perm
ipc_perm 数据结构描述一个系统 V IPC 对象的访问权限
参见 include/linux/ipc.h
struct ipc_perm
{
key_t key;
ushort uid; /* owner euid and egid */
ushort gid;
ushort cuid; /* creator euid and egid */
ushort cgid;
ushort mode; /* access modes see mode flags below */
ushort seq; /* sequence number */
} ;
irqaction
irqaction 数据结构描述系统的中断处理程序
参见 include/linux/interrupt.h
struct irqaction {
void (*handler)(int, void *, struct pt_regs *);
unsigned long flags;
unsigned long mask;
const char *name;
void *dev_id;
struct irqaction *next;
} ;
linux_binfmt
Linux 理解的每一个二进制文件格式都用一个 linux_binfmt 数据结构表示
参见 include/linux/binfmt.h
struct linux_binfmt {
struct linux_binfmt * next;
long *use_count;
int (*load_binary)(struct linux_binprm *, struct pt_regs * regs);
int (*load_shlib)(int fd);
int (*core_dump)(long signr, struct pt_regs * regs);
} ;
mem_map_t
mem_map_t 数据结构（也叫做 page ）用于存放每一个物理内存页的信息
参见 include/linux/mm.h
typedef struct page {
/* these must be first (free area handling) */
struct page *next;
struct page *prev;
struct inode *inode;
unsigned long offset;
struct page *next_hash;
atomic_t count;
unsigned flags; /* atomic flags, some possibly
updated asynchronously */
unsigned dirty:16,
age:8;
struct wait_queue *wait;
struct page *prev_hash;
struct buffer_head *buffers;
unsigned long swap_unlock_entry;
unsigned long map_nr; /* page->map_nr == page - mem_map */
} mem_map_t;
mm struct
mm_struct 数据结构用于描述一个任务或进程的虚拟内存
参见 include/linux/sched.h
struct mm_struct {
int count;
pgd_t * pgd;
unsigned long context;
unsigned long start_code, end_code, start_data, end_data;
unsigned long start_brk, brk, start_stack, start_mmap;
unsigned long arg_start, arg_end, env_start, env_end;
unsigned long rss, total_vm, locked_vm;
unsigned long def_flags;
struct vm_area_struct * mmap;
struct vm_area_struct * mmap_avl;
struct semaphore mmap_sem;
} ;
pci_bus
系统中的每一个 PCI 总线用一个 pci_bus 数据结构表示
参见 include/linux/pci.h
struct pci_bus {
struct pci_bus *parent; /* parent bus this bridge is on */
struct pci_bus *children; /* chain of P2P bridges on this bus */
struct pci_bus *next; /* chain of all PCI buses */
struct pci_dev *self; /* bridge device as seen by parent */
struct pci_dev *devices; /* devices behind this bridge */
void *sysdata; /* hook for sys-specific extension */
unsigned char number; /* bus number */
unsigned char primary; /* number of primary bridge */
unsigned char secondary; /* number of secondary bridge */
unsigned char subordinate; /* max number of subordinate buses */
} ;
pci_dev
系统中的每一个 PCI 设备，包括 PCI-PCI 和 PCI-ISA 桥设备都用一个 pci_dev 数据结构代表
参见 include/linux/pci.h
/*
* There is one pci_dev structure for each slot-number/function-number
* combination:
*/
struct pci_dev {
struct pci_bus *bus; /* bus this device is on */
struct pci_dev *sibling; /* next device on this bus */
struct pci_dev *next; /* chain of all devices */
void *sysdata; /* hook for sys-specific extension */
unsigned int devfn; /* encoded device & function index */
unsigned short vendor;
unsigned short device;
unsigned int class; /* 3 bytes: (base,sub,prog-if) */
unsigned int master : 1; /* set if device is master capable */
/*
* In theory, the irq level can be read from configuration
* space and all would be fine. However, old PCI chips don't
* support these registers and return 0 instead. For example,
* the Vision864-P rev 0 chip can uses INTA, but returns 0 in
* the interrupt line and pin registers. pci_init()
* initializes this field with the value at PCI_INTERRUPT_LINE
* and it is the job of pcibios_fixup() to change it if
* necessary. The field must not be 0 unless the device
* cannot generate interrupts at all.
*/
unsigned char irq; /* irq generated by this device */
} ;
request
request 用于向系统中的块设备发出请求。请求都是从 / 向 buffer cache 读 / 写数据块
参见 include/linux/blkdev.h
struct request {
volatile int rq_status;
#define RQ_INACTIVE (-1)
#define RQ_ACTIVE 1
#define RQ_SCSI_BUSY 0xffff
#define RQ_SCSI_DONE 0xfffe
#define RQ_SCSI_DISCONNECTING 0xffe0
kdev_t rq_dev;
int cmd; /* READ or WRITE */
int errors;
unsigned long sector;
unsigned long nr_sectors;
unsigned long current_nr_sectors;
char * buffer;
struct semaphore * sem;
struct buffer_head * bh;
struct buffer_head * bhtail;
struct request * next;
} ;
rtable
代码接下一页(14-1)
|
|
狗仔卡
发表于 2007-7-18 22:59:01
QQ空间
腾讯微博
腾讯朋友
收藏
顶
踩
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡